Create a Stunning Backsplash in your Kitchen

by Robin Sylvester 05/24/2020


 Photo by P_Kennedy123 via Pixabay

The word is out! Tile is back, and we couldn't be happier. No other medium finishes the look of a kitchen like a tile backsplash. And regardless of your skill level, with a little patience, almost anyone can create a stunning tile backsplash. Here's how it's done!

What you'll need

  • Tile of choice
  • Grout
  • Trowel
  • Thin-set mortar
  • Level 
  • Rubber float
  • Sponge
  • 1X4" ledger board
  • Spacers 

Choose your tile

Tiles come in all sizes, mediums and configurations. When choosing a tile, consider how well it fits within your overall kitchen style, any maintenance requirements and installation difficulty level.

Some materials include:

  • Natural stone
  • Ceramic
  • Concrete
  • Stainless steel
  • Glass

If you're looking for less of a challenge or are short on time, you can take shortcuts and still create a durable and beautiful backsplash you'll love. Look for tiles that are peel & stick such as subway tiles or groupings of small tiles bound together in a grid. 

Prep the area

Look under cabinets and across the wall to see if dust, grease or cobwebs linger. You'll want those out of your way before you begin. Let the wall dry entirely if you need to use a damp cloth.

If the backsplash isn't resting against the back of a countertop, use your level to align and nail a temporary 1X4" board to the wall to support the lowest layer of tiles while they cure. 

*Pro tip* Read instructions provided by the tile manufacturer. They may have additional prep and installation advice specific to their product. Don't ignore it!

Plan your layout

Before you lay a single drop of mortar, plan and measure. Make sure you have the right number of tiles, including cut half tiles, if necessary.

Mix & apply the mortar

Always start at the bottom and work your way up, leaving 1/8 inch gap at the bottom to allow for expansion. Apply the thin-set with the trowel in a wavy motion, covering only a small section at a time.

Then begin placing your tiles with a slight twist to engrain the adhesive. Use your rubber float to press down on tiles evenly and then add a spacer between each to both hold them in place and ensure they're equally set apart. Repeat until your entire tile backsplash is in place.

Set & grout

Let the backsplash cure for at least 24 hours from the moment you set the last tile. Then remove your spacers and mix up your grout. Completely cover the tiles, ensuring it works its way between them. After 10 minutes, clean the surfaces of your tiles with a moist sponge, leaving the grout behind.

And you've just created a tile backsplash. For more fun and affordable ways to enhance your home, follow our blog.

About the Author
Author

Robin Sylvester

With a background of 17+ years in Customer Service, you can rest assured that Robin takes Customer Service very seriously, and will bring you excellent quality service. Robin has well established herself as being someone of high standards and one who displays professionalism at all times. With Robin at your service you will have an agent who is a complete package; Excellent customer service, a savvy negotiator, one who has expanded knowledge of mortgages and knows how to get the best financing that fits you, and one who truly understands the total process of the Real Estate transaction. Robin is a Christian; one who loves the Lord, her family and her job (in that order). So don't delay, insist on Robin to be at your service today!